A man tha Bare Shaft Wafer/Lug inzawmna Butterfly Valve Ductile Iron Rubber Center Lined Valve Tui siamthat Valve

bare shaft a nibutterfly valve a nichina valve tui siamthatna valve

Hrilhfiahna

Centric Butterfly Valve te chu a awm a

Tlanglawn

• A lian zawng: 1.5” -72.0” (40mm-1800mm) a ni.
• A lum zawng zawng: -4F-400F (-20C – 204C) a ni.
• Pressure Rating: 90 psig, 150 psig, 230 psig, 250 psig te a ni

Nihphung

• Taksa chi hrang hrang: Wafer, Lug leh Double Flanged te a awm
• Taksa hmanrua: Cast Iron, Ductile Iron, Nylon 11 Coated Cast Iron emaw Ductile Iron emaw, Carbon Steel, 304 leh 316SS te a ni
• Taksa Coating: Standard Two Part Polyester Epoxy, Nylon duhthusam 11
• Disc: Nylon 11 Coated Ductile Iron, 304SS, 316SS, Aluminum Bronze, Nylon 11 Coated 316SS te a awm a, a chhuahna tur hmun leh a hmanna tur hmun hi a inang lo hle
• Thutna tur: EPDM(Ei tur chi hrang hrang), Buna N, Viton, White EPT(Ei tur chi hrang hrang), Hypalon, Silicone, Neoprene
• Bearings: Lower Stem Bronze emaw (opt)SS emaw, Upper(seat chunglam)SS, Top Delrin emaw a ni
• A hnah: 410SS, 304SS, 316SS, 17-4 Ph SS
• Mounting:ISO-5211 Stem(square te tak te) leh Mounting Pad
• Drive: One Piece Shaft atanga 14”, Shaft Spline atanga Disc Attachment(VF7A),Split Shaft thleng a ni>0” a ni a, Spline Drive(VF7A) a awm bawk.
• Stem Retention: 1.5” thru 12.0” ah hian Top Pad ah Q Pin Slot a awm a, chu chuan SS Through Pin a vawng reng a, 14.0” thru 48” ah a nei a, Stainless Steel Valve zawng zawng ah hian Removable Plate Retaining the SS Through Pin a awm bawk
• Hnathawh tur pressure: 87 psig, 150 psig, 230 psig Bi-Directional Bubble Tight Shutoff a ni.
• 5”-12.0” Lug Rated 200 psig Dead End Shutoff, 14.0” leh a chunglam Lug Rated 150 psig Dead End Shutoff, Test Report a awm
• Private Label Valve a awm bawk

• Centric a niButterfly Valve te pawh a awmA chiang zawk

  • A tawp bera inzawmna: 125/150 ANSI, Wafer, Lug, Flanged
  • A rilru a buai em em a, a rilru a hah em em bawk a. ASME B16.34, AWWA C504
  • Mounting: ISO-5211(ISO-5211 Operator zawng zawng tan a fit)
  • A design: ISO-5208,AWWA C504,ASME B16.34 te chu a hnuaia mi ang hian a ni
  • Hmai leh hmai: API-609,ISO-5752, AWWA C504(54.0”-72.0”)
  • Marking: MSS-SP-25 hmanga chhinchhiahna pek a ni
  • EX Certificate: ATEX 94/9/EG Group II Category 2 GD a ni a, a hlawhtling hle
  • ABS Certificate: ABS Steel Lawng Dan 1-1-7/7, 4-6-2/5.11-a siam a ni

  Dilna hrang hrang

  • HVAC a ni
  • Chaw ei tur rawngbawlna
  • Petrochemical hmanga siam a ni
  • OEM a ni
  • Kangmei venna
  • Tuipui tui
  • Flue Gas hmanga siam a ni
  • Chemical lam thil a ni