ED Series Wafer hnim hring hring a ni
Hrilhfiahna:
ED Series Wafer butterfly valve hi soft sleeve type a ni a, taksa leh fluid medium dik takin a then thei a,...
A bulpui ber berte hman tur:
| Parts hrang hrang | Bungrua |
| Taksa | CI,DI,WCB,ALB,CF8,CF8M te hi a ni |
| Disc hmanga siam a ni | DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel hmanga siam a ni |
| Kuang | SS416,SS420,SS431,17-4PH te hi a ni |
| Thutna | NBR,EPDM,Viton,PTFE te an ni |
| Taper Pin a ni | SS416,SS420,SS431,17-4PH te hi a ni |
Seat chi hrang hrang:
| Bungrua | Lum leh vawt tehna | Description hmang rawh |
| NBR | -23°C ~ 82°C a ni | Buna-NBR:(Nitrile Butadiene Rubber ) hian tensile strength tha tak a nei a, abrasion a do thei bawk.Hydrocarbon products pawh a do thei bawk.Tui,vacuum,acid,salts,alkalines,fats,oils,greases,hydraulic oils leh ethylene glycol-a hman tur general-service material tha tak a ni. Buna-N hian acetone,ketones leh nitrated emaw chlorinated hydrocarbons atan a hmang thei lo. |
| Shot hun chhung-23°C ~120°C a ni | ||
| EPDM a ni | -20 °C~130°C a ni | General EPDM rubber: hi general-service synthetic rubber tha tak a ni a, tui lum, in tur, bawnghnute product system leh ketones, alcohol, nitric ether esters leh glycerol awmnaah te hman thin a ni. Mahse EPDM hian hydrocarbon based oil, mineral leh solvent atan a hmang thei lo. |
| Shot hun chhung-30°C ~ 150°C a ni | ||
| Viton chuan a rawn ti a | -10 °C~ 180°C a ni | Viton hi fluorinated hydrocarbon elastomer a ni a, hydrocarbon oil leh gas tam zawk leh petroleum atanga siam thil dangte lakah a do tha hle. Viton hi steam service atan, tui lum 82°C aia sang emaw concentrated alkalines atan hman theih a ni lo. |
| PTFE a ni | -5°C ~ 110°C a ni | PTFE hian chemical performance stability tha tak a nei a, surface pawh a sticky lo ang.Chutih rual chuan lubricity property tha tak leh aging resistance tha tak a nei bawk. Acid, alkali, oxidant leh corrodents dang siamna atana hman tur thil tha tak a ni. |
| (Inner liner EDPM) a ni. | ||
| PTFE a ni | -5°C~90°C a ni | |
| (Inner liner NBR) a ni. |
Hmalakna:lever,gearbox,electrical actuator,pneumatic hmanga thil tih theihna.
Ziarang:
1.Stem head design of Double “D” or Square cross:Actuator hrang hrang nena inzawm awlsam,torque tam zawk pe thei;
2.Two piece stem square driver:No-space connection hi eng dinhmun tha lo pawhin a hman theih;
3.Body nei lo Frame structure:Seat hian taksa leh fluid medium a then thei chiang hle,leh pipe flange nen a remchang.
A zau zawng: 1.1.
A kaihhnawih thil siam
-
UD Series-a thut harsa tak, butterfly valve
Description: UD Series hard seated butterfly valve chu Wafer pattern a ni a, flanges a nei ,a hmai leh hmaiah EN558-1 20 series wafer type angin a awm. A bulpui berte hmanraw: Parts Material Taksa CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBR,EPDM,Viton,PTFE Taper Pin SS416,SS420,SS431,17-4PH A nihna: 1.Flang...
-
GD Series-a grooved tawp ber butterfly valve a ni
Description: GD Series grooved end butterfly valve hi grooved end bubble tight shutoff butterfly valve a ni a, flow characteristics langsar tak a nei a ni. Rubber seal hi ductile iron disc-ah mold a ni a, hei hi flow potential sang ber a awm theih nan a ni. Grooved end piping application atan service man tlawm, efficient leh rintlak tak a pe a ni. Grooved end coupling pahnih hmanga awlsam taka dah theih a ni. A hman dan tlangpui: HVAC, filtering system...
-
DC Series flanged eccentric butterfly valve hmanga siam a ni
Description: DC Series flanged eccentric butterfly valve hian positive retained resilient disc seal leh integral body seat emaw a keng tel a ni. Valve hian thil danglam bik pathum a nei a, chungte chu a rit tlem zawk, chakna tam zawk leh torque hniam zawk a ni. A nihna: 1. Eccentric action hian hnathawh laiin torque leh seat contact a tihtlem avangin valve dam chhung a ti rei 2. On/off leh modulating service atan a tha. 3. Size leh chhiat a zirin seat hi repai...
-
UD Series Butterfly valve chu a thutna nem tak a ni
UD Series soft sleeve seated butterfly valve chu Wafer pattern a ni a, flanges a nei ,a hmai leh hmaiah EN558-1 20 series wafer type angin a awm. Characteristics: 1.Correcting holes chu flange-ah standard angin siam a ni a, installation laiin siamthat awlsam. 2.Through-out bolt emaw, a sir khata bolt emaw hman tur. Replace leh maintenance awlsam tak a ni. 3.Soft sleeve seat hian taksa chu media atanga a isolate thei. Product hman dan tur zirtirna 1. Pipe flange standard ...
-
MD Series Wafer butterfly valve hmanga siam a ni
Description: Kan YD series nen khaikhin chuan,MD Series wafer butterfly valve flange connection chu a specific a,a handle chu malleable iron a ni. Hnathawh dan: • EPDM liner tan -45°C atanga +135°C • NBR liner tan -12°C atanga +82°C • PTFE liner tan +10°C atanga +150°C Main Part-a hman tur: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NB...
-
BD Series Wafer butterfly valve hmanga siam a ni
Description: BD Series wafer butterfly valve hi medium pipe hrang hranga flow cut-off emaw regulate emaw atan hman theih a ni. Disc leh seal seat-a thil chi hrang hrang thlan hmangin, chubakah disc leh stem inkara pinless connection hmangin,valve hi dinhmun chhe zawkah hman theih a ni a, chu chu desulphurization vacuum, tuifinriat tui desalinization te hi a ni. Characteristic: 1. A size a te&light a, enkawl pawh a awlsam. A ni thei...
